3M Round Conductor Flat Cable .050 28 AWG Stranded, PVC 3667 Series S Combines the routing ease of discrete wire round cable with the mass termination capabilities of a ribbon cable S Split conductor sections allow for easy routing S One inch bonded cable sections of 28 AWG wire on .050 inch centers permit termination to our broad line of IDC connectors S Zippable for branching or discrete termination S Split-bond lengths can be varied, see Note 2 in Ordering Information S *RoHS compliant Date Modified: May 24, 2004 TS-0247-13 Sheet 1 of 2 Physical Insulation Material: Polyvinyl Chloride (PVC) Color: Gray Marking Standard: None AWM 2651 105C 300V VW1 3M NU C AWM IA 105C 300V FT1 Canadian Option: EU <50V Conductors: 28 AWG 7 x 36 [ 7 x 0.127 ] Tinned Stranded Copper Electrical Voltage Rating: Insulation Resistance: Characteristic Impedance: Capacitance: Inductance: Propagation Delay: Velocity of Propagation: USA: 300V Canada: 300V > 1 x 1010 /10 ft. [ 3 m ] Unbalanced: 112 Unbalanced: 12.7 pF/ft. [ 41.5 pF/m ] Unbalanced: .16 H/ft. [ 0.52 H/m ] Unbalanced: 1.42 ns/ft. [ 4.66 ns/m ] Unbalanced: 72% EU: <50V Note: Unbalanced is measured between ground-signal-ground conductors. Environmental Temperature Rating: --20C to +105C Flammabality Rating: USA: VW-1 Canada: FT1 *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment UL File No.: E42769, Style No.: 2651 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3 Interconnect Solutions http://www.3M.com/interconnects/ data_pp (For Web PDF Output) 3M Round Conductor Flat Cable .050 28 AWG Stranded, PVC 3667 Series Number of Conductors 3M Part Number 10 3667/10 .500 .010 [12.70 ] .450 .007 [ 11.43 ] 14 3667/14 .700 .010 [ 17.78 ] .650 .007 [ 16.51 ] 16 3667/16 .800 .015 [ 20.32 ] .750 .011 [ 19.05 ] 20 3667/20 1.000 .015 [ 25.40 ] 0.950 .011 [ 24.13 ] 24 3667/24 1.200 .015 [ 30.48 ] 1.150 .011 [ 29.21 ] 25 3667/25 1.250 .015 [ 31.75 ] 1.200 .011 [ 30.48 ] 26 3667/26 1.300 .015 [ 33.02 ] 1.250 .011 [ 31.75 ] 30 3667/30 1.500 .020 [ 38.10 ] 1.450 .015 [ 36.83 ] 34 3667/34 1.700 .020 [ 43.18 ] 1.650 .015 [ 41.91 ] 36 3667/36 1.800 .020 [ 45.72 ] 1.750 .015 [ 44.45 ] 37 3667/37 1.850 .020 [ 46.99 ] 1.800 .015 [ 45.72 ] 40 3667/40 2.000 .020 [ 50.80 ] 1.950 .015 [ 49.53 ] 44 3667/44 2.200 .020 [ 55.88 ] 2.150 .015 [ 54.61 ] 50 3667/50 2.500 .020 [ 63.50 ] 2.450 .015 [ 62.23 ] 60 3667/60 3.000 .020 [ 76.20 ] 2.950 .015 [ 74.93 ] 64 3667/64 3.200 .020 [ 81.28 ] 3.150 .015 [ 80.01 ] (OPTIONAL) Dimension A (See Note 2) A Variable Length Suffix Table B Example of variable bond and flat repeats .050 | .002 Typ [ 1.27 ] .025 | .007 [ 0.64 ] Dimension B (See Note 2) .035 .003 [ 0.89 ] 28 AWG 7 X 36 [ 7 X 0.127 } Tinned Stranded Copper Conductors Suffix Repeat Bond MO 6.50 1.50 SV 9.50 1.00 BU 13.00 1.00 PVC Insulation Split Bonded + .25 1.0 - .13 [ 25 ] Inch [mm] 2.4 | .25 [61] Tolerance Unless Noted Split-bond lengths can be varied, see Note 2 in Ordering Information below. Inch Note: 1. Red marking on one edge of cable designates wire #1. 2. A & B dimensions pertain to bonded areas only. Ordering Information .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference only 3667/XX XX Blank = Standard C = Canadian Certified Version Variable Length (See variable length suffix table) Number of Conductors (See Table) Notes: 1. Available in standard lengths of 100 feet or 300 feet per roll, please specify when ordering. 2. Standard product has a split-bond repeat length of 2.4 inches (6.1 cm) with a 1.0 inch (2.5 cm) bonded section. The split-bond repeat length can be specified up to 24 inches (61.0 cm). The minimum split or bonded length is 1/2 inch (1.3 cm). 3. For special requirements, contact your 3M sales representative. TS-0247-13 Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3 Interconnect Solutions http://www.3M.com/interconnects/ data_pp (For Web PDF Output) Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/esd (c) 3M 2004